OUR RANGE OF ACTIONS

Mayfair Engineering has been designing and manufacturing fine gun and rifle actions for the ‘best gun’ trade for more than 20 years and specialising in designing, prototyping and manufacturing proprietary shotguns and rifles alongside providing design solutions for military weapons systems.


Calibres

  • .243 Win, .308 Win, 7.62mm, etc
  • Maximum cartridge length 72.0mm (2.834")

Receiver

  • Right hand or left hand
  • Double square bridge, single square bridge or round bridge
  • Machined from a stress relieved billet of 8620
  • Integral C Ring
  • Blind receiver screw holes
  • Solid left wall
  • Barrel shank threads 28mm x 12tpi Whitworth (standard Mauser 98 thread)
  • Guard screw spacing: 182.5mm (7.185")
  • Guard screw thread: 1/4 inch x 28 tpi
  • Approximate weight of double square bridge 1.350kg (2lb 15 1/2oz)

SHORT SPECIFICATION

Bottom Metal

  • Machined from solid and calibre specific
  • Hinged floorplate with push button release
  • Trigger bow available in two styles: Safari or Hunter
  • 4° inclusive draft angle around the entire profile
  • Magazine capacity: 5 rounds



Bolt

  • Machined from a stress relieved billet of 8620

  • Dual opposed locking lugs

  • Top guide lug

  • Third safety lug

  • Calibre specific bolt face

  • Handle with 'scope cut out as standard

  • 3-position side safety as standard

  • 1.7mm (0.067") firing pin tip for use with high pressure cartridges

  • Case hardened

Short Mauser double square bridge action in .243 Win, 5 round standard magazine with “Hunter” style trigger guard.

SHORT

Calibres

  • .275 Rigby up to and including .300 Win Mag.
  • Maximum cartridge length 88.0mm (3.46")

Receiver

  • Right hand or left hand
  • Double square bridge, single square bridge or round bridge
  • Machined from a stress relieved billet of 8620
  • Integral C Ring
  • Blind receiver screw holes
  • Solid left wall
  • Barrel shank threads 28mm x 12tpi Whitworth (standard Mauser 98 thread)
  • Guard screw spacing: 198.5mm (7.815")
  • Guard screw thread: 1/4 inch x 28 tpi
  • Approximate weight of double square bridge 1.450kg (3lb 3 1/4 oz)

STANDARD SPECIFICATION

Bottom Metal

  • Machined from solid and calibre specific
  • Drop box as standard on belted calibres
  • Hinged floorplate with push button release
  • Trigger bow available in two styles: Safari or Hunter
  • 4° inclusive draft angle around the entire profile
  • Magazine capacity varies according to calibre.



Bolt

  • Machined from a stress relieved billet of 8620
  • Dual opposed locking lugs
  • Top guide lug
  • Third safety lug
  • Calibre specific bolt face
  • Handle with 'scope cut out as standard
  • 3-position side safety as standard
  • 1.7mm (0.067") firing pin tip for use with high pressure cartridges
  • Case hardened

STANDARD

Bottom Metal

  • Machined from solid and calibre specific 
  • Drop box as standard on magnum calibres
  • Hinged straddle style floorplate with push button release 
  • Trigger bow available in two styles: Safari or Hunter 
  • 4° inclusive draft angle around the entire profile 
  • Magazine capacity varies according to calibre.

Calibres

  • .375 H&H, .416 Rigby, .500 Jeffery, etc
  • Maximum cartridge length 97.4mm (3.835")


Receiver

  • Right hand or left hand 
  • Double square bridge, single square bridge or round bridge 
  • Machined from a stress relieved billet of 8620 Integral C Ring 
  • Blind receiver screw holes 
  • Solid left wall 
  • Barrel shank threads 28mm x 12tpi Whitworth (standard Mauser 98 thread) 
  • Guard screw spacing: 198.5mm (7.815") 
  • Guard screw thread: 1/4 inch x 28 tpi
  • Approximate weight of double square bridge 1.545kg (3lb 6 1/2oz)

MAGNUM SPECIFICATION

Bolt

  • Machined from a stress relieved billet of 8620
  • Dual opposed locking lugs 
  • Top guide lug 
  • Third safety lug 
  • Calibre specific bolt face 
  • Handle with 'scope cut out as standard 
  • 3-position side safety as standard 
  • 1.7mm (0.067") firing pin tip for use with high pressure cartridges 
  • Case hardened

MAGNUM

HOME

ABOUT

BOLT ACTION

COMPONENTS

CONTACT

© 2018 Mayfair Engineering 

All Rights Reserved | Privacy Policy

Nicks Lane | Brome | Eye | IP23 8AN | United Kingdom


For enquires or questions please contact us directly on:


T: +44 (0) 1379 871510 

E: info@mayfairengineering.com


Mayfair Engineering has been designing and manufacturing fine gun and rifle actions for the ‘best gun’ trade for more than 20 years and specialising in designing, prototyping and manufacturing proprietary shotguns and rifles alongside providing design solutions for military weapons systems.


Branding & Design: Virtue Design